Pool maintenance: Five things to check in the fall

The chilly weather we had this weekend was a reminder that fall is upon us. While we’ll have plenty of time to swim in the upcoming months (thank you Southeast Texas subtropical weather), now is the time to make sure your pool maintenance is on point. Everyone likes lists, so we’ve compiled a quick checklist of five things you need to check on this fall to keep your pool maintenance up to date.

Five fall maintenance steps

1. Clean your filters: As we have written in a previous article, fall and spring are the ideal times to clean your pool filters. With the increased amount of leaves and debris that fly into your pool during this time of year, you want to make sure that your filters are in tip-top shape. It’s more important this year than normal, as the rainwater and biologicals (leaves, dirt, and other natural debris) from Hurricane Harvey have certainly tested the capacity of your filters.

Clean filters allow for your robotic cleaners to do their job and your water chemistry to stay on point. And it’s best to clean them now while it’s still warm — going out and doing it in the winter when the water and air temperature are in the 40s and 50s is no one’s idea of a good time.

2. Cover/drain your backflow preventer: One of the biggest problems one can run into in pool maintenance is a frozen backflow preventer. When a freeze comes (and it’ll most certainly come), the backflow preventers are susceptible to cracking. They crack because they aren’t completely drained, therefore the remaining water inside freezes, expands and puts stress on the backflow preventer. Near-freezing temperatures and wind can also cause trouble, as cold wind sometimes cools the preventer enough to cause freezing and cracking.

Draining the backflow is important (and something we’ll come over to do for a fee), but covering the preventer to keep out the wind is important, too. There are several ways to do this: you can wrap the preventer in a plastic bag, shield it with a dry box, or even put a trash can upside down over it. Call us for consultation or head to the websites of our suppliers (Febco, Wilkins and Watts) for covering and draining tips. These tips also work on backflow preventers for sprinkler systems. A Total Coverage can handle those issues.

3. Check your water chemistry: This is something that you should do regularly, but if you only do it a few times a year, the fall is one of those times. You’re just emerging from the high-usage summer/early fall months, which typically involves regularly placing chlorine tablets in the pool. If you use chlorine tablets regularly (or more than that), there’s a chance that your pool chemistry is a little off-kilter. Too much chlorine can result in too much cynaric acid, which not only will stain the surface of your pool, but could also corrode the elements of your heater (which we’ll go into more in point No. 4).

Along with the cynaric acid, it’s important to check your water’s calcium and alkalinity readings as well. Checking on these things are something you should do weekly via your IntelliChem system, but it’s very important during the fall months.

4. Make sure your heater and lights are tip-top shape: When it’s 95 degrees with 90 percent humidity, as it is during the summer months on non-rainy days, the last thing you think about is heating your pool. But come Thanksgiving and Christmas, when the water and air are cooler, a heater is suddenly very important for that post-meal/post-giftgiving dip. So it would stink if you turned on your heater Thanksgiving Day, only for it to be needing maintenance. As much as we’d like to help you right away in those circumstances, the logistics of the holidays make it extremely difficult to do so.

Therefore, this is the perfect time for a dry run of your heater to make sure everything is good to go. Hopefully all will be good, but if there’s corrosion or any other problems, finding that now will give you plenty of time to contact us and for us to come out and attend to the problem. A quick check/call now is a heck of a lot better than discovering the problem on Thanksgiving or Christmas Eve. The same logic applies with lights — discovering any lighting problems now will allow us to fix them in time for your holiday get-togethers.

5. Skim your pool for leaves: This plays into No. 1 a bit, but it’s important to make sure that the leaves that fall in your pool don’t stay and accumulate. Not only do they make the surface of the water grimy, but they put stress on the the filters and the water chemistry readings. Stagnant leaves can get stuck in robotic cleaners and filters and clog skimmers. The remnants of them can also throw your chemistry out of whack and make your pool prone to staining. Here’s a previous article we wrote on leaf removal.

Leaves can also wreak havoc on variable flow pumps. They can crack baskets and manifolds while causing all sorts of issues. The IntelliFlo VF pump has monitors that alert you before such things happen, but even if you have one, be sure to remove falling leaves from your pool regularly.

While you can do a lot of this maintenance on your own, feel free to give us a call for help at any time. We’ll come out and perform these services for you for a fee.


Discover Ultimate Pools

Ultimate Pools has been a leader in pool building and outdoor improvements in Magnolia, The Woodlands and Southeast Texas since 1991, specializing as a pool builder since 1999. From pools, waterfalls, hot tubs, decks, outdoor kitchens and outdoor improvements, Ultimate Pools will provide the highest of quality and customer service to you. Surf our website, follow us on Facebook and Instagram, send us an email, give us a call at (936) 321-9632, or visit our offices at 5170 FM 1488, Magnolia, TX 77354 today!

Getting your pool in balance post-Harvey

Cleaning and draining your pool (if necessary) is a big part of getting your pool back in shape after heavy rains. But just because your pool is glistening does not mean that its recovery from Hurricane Harvey is complete. For your pool to truly be in tip-top shape the water chemistry must be in balance.

In this article, we’re going to take that newly cleaned pool water and make sure it’s chemically in balance. If it isn’t, we’re going to show you the importance of that balance and how to achieve it.

Putting your pool water in balance

The pool in the picture above looks glistening and ready to go, but having clean, aqua pool water doesn’t necessarily mean that everything is up to snuff. There are three areas of water chemistry which are extremely important in the well-being of your pool — the amount of cynaric acid, the calcium content and the alkalinity.

It’s very important to continuously check these metrics and not simply stop and be satisfied once the water is a desirable color. If you don’t check them, especially when dealing with a rain and flooding event such as Harvey, you leave your pool susceptible to algae blooms and scaling.

We detailed these measurements in an article we did on IntelliChem. While the IntelliChem system will let you know what the measurements are, the cynaric acid and chlorine will have to be applied separately.

Of the three measurements, cynaric acid might be the most important. Cynaric acid acts as a stabilizer, protecting the chlorine from getting burned off by the sun and losing its potency. Cynaric acid operates in a similar way that sulfates do in wine or homogenization does with milk. It keeps the chlorine fresh so it can do its part to get your water in balance. Having 30-35 parts per million of cynaric acid will help chlorine do its thing and help with calcium and alkalinity.

If you simply shock the pool every so often or throw in chlorine tablets without paying attention to the cynaric acid output, you’re likely to get the dreaded algae and scaling. And that’s not a good time.

How calcium and alkalinity keep water in balance

Keeping tabs on calcium is extremely important, as too little calcium will cause the water to eat away at the plaster while too much calcium will cause scaling on walls and on the pool surface. You want to keep the calcium between 200 and 400 parts per million, with 250 being the sweet spot.

As far as alkalinity, keeping it under control is necessary to prevent corrosion of the metal equipment in the pool and staining of the plaster. The range for alkaline substances is 80 parts per million to 200 parts per million, with 120 being the ideal amount. You should also aim to have the pH in your pool between 7.2 and 7.8, with 7.5 the prime target. Chlorine, with cynaric acid as a lead blocker, can get these elements to where you need them to be. For best results, have your free chlorine at 3.0 parts per million. As always, feel free to contact us with any questions about these matters.


Discover Ultimate Pools

Ultimate Pools has been a leader in pool building and outdoor improvements in Magnolia, The Woodlands and Southeast Texas since 1991, specializing as a pool builder since 1999. From pools, waterfalls, hot tubs, decks, outdoor kitchens and outdoor improvements, Ultimate Pools will provide the highest of quality and customer service to you. Surf our website, follow us on Facebook and Instagram, send us an email, give us a call at (936) 321-9632, or visit our offices at 5170 FM 1488, Magnolia, TX 77354 today!

Cleaning and draining your pool post-Harvey

Now that Hurricane Harvey’s rain has fallen, it comes time to assess the damage and clean up your pool. There are several factors to consider when cleaning or draining your pool, between your safety, particulates in the pool and rebalancing the chemistry of the water. We did a short “what to watch for” post last year during the torrential spring rains that Southeast Texas was getting. That’s a good reference while evaluating what you need to do.

The above picture shows one of our pools in the aftermath of Harvey. The owners were lucky not to have much in the way of flood damage, and their IntelliChem system did its job in helping keep the pool’s chemistry on point throughout the storm. We offer the IntelliChem system with all of our pools, and having one — and putting it to use — drastically reduces the need for draining your pool.

Cleaning and draining your pool: What to look for beforehand

Unfortunately, Harvey wasn’t as kind to all of our customers in Montgomery County and Southeast Texas. Some of them fell victim to the flooding that plagued (and still plagues) the region. That resulted in pictures such as the two below.

In the cleaning your pool article that was linked in the first paragraph, there were three things that needed to be monitored: safety from fallen items/animals that might have drifted in the pool area, particulates such as dirt/mulch and leaves, and water chemistry. Since Harvey was much more a rain event than a wind event in Montgomery County, falling debris from trees and houses weren’t as much of a concern. However, insects, reptiles and small mammals could have been washed into your pool area (depending on how much flooding you received) and the sheer amount of rain water will throw your chemistry off.

But a big X-factor in the Harvey clean-up will be keeping mindful of possible bacteria. The Association of Pool & Spa Professionals warns that animals and possible sewage in flood waters can cause spikes in E-Coli and other harmful bacteria. It advises using bacteria test strips on the water to get readings. If there is a bacteria issue, chlorine might not be effective, so use products such as Sea Klear PRS Stage 1 and 2 to break down the bacteria and trap it in your filters.

Draining your pool: Do’s and dont’s

We covered the process of this last year, which we paired with the other linked article in the first paragraph. Please feel free to read this, but we’ll also highlight a few things that might be relevant for this storm.

One of the main things you need to do is clean your filters constantly. The filters serve as an integral part of the cleaning process, as they trap the debris and separate it from the pool water. However, when you’re dealing with floods and rain water of this degree, the filters will get full, overwhelmed and not do their job fully if left unmonitored. Therefore, it’s important to clean and empty them yourself or call us to do it for you for a fee. Cleaning and emptying filters are available for a fee as part of our pool maintenance services.

Along with keeping the filters in tip-top working shape, you also need to brush your pool several times a day. Brushing the pool uproots debris that’s clinging the surface of your pool and releases it into the water. From there, the filters and vacuums can capture and separate it. Brushing the pool also is huge in preventing algae from forming down the road. It also allows the IntelliChem system to balance the water chemistry more effectively.

As far as dont’s, do not ever drain the pool completely. If you do that, the shell of the pool will “pop up” and “float” out of place, causing an extreme headache and even more labor. The saturation of the ground after a rain event like Harvey makes a dislodged shell even more of a concern, as the moisture and dirt below the surface push the shell out if there’s not enough volume inside the pool to push back against it. It’s a phenomenon we detail in this article.

Instead, drain the pool no more than halfway and refill the drained portion with clean water. From there, use vacuums and filtration to further clean the water, along with the IntelliChem system’s water chemistry capabilities. Sometimes one draining will do the trick; sometimes you’ll need more. Either way, never drain the pool more than halfway. This is another service we provide for a fee as part of our pool maintenance package.

Either way, your pool will once again look like this.

Give us a call for help in this area, and stay safe.


Discover Ultimate Pools

Ultimate Pools has been a leader in pool building and outdoor improvements in Magnolia, The Woodlands and Southeast Texas since 1991, specializing as a pool builder since 1999. From pools, waterfalls, hot tubs, decks, outdoor kitchens and outdoor improvements, Ultimate Pools will provide the highest of quality and customer service to you. Surf our website, send us an email, give us a call at (936) 321-9632, or visit our offices at 5170 FM 1488, Magnolia, TX 77354 today!

Hot weather means more algae blooms

Algae blooms are not a unique subject matter to readers of this website. During last spring’s heavy rains we wrote about how excess moisture and materials can cause algae to bloom. While that remains true, excess moisture isn’t the only thing that can prompt algae blooms. Hot weather like we’ve seen recently can be a catalyst, too.

Despite the weather being dry (and very hot) we’ve gotten reports of algae accumulating in the pools of customers. So why is this happening?

How heat causes algae blooms

pool spa rocks woodlands

So why is the algae blooming in this heat? If you’re looking for something to blame, just look straight up in the sky. Be sure to put on sunglasses though, as the sun is the primary culprit in the recent algae blooms. The strength of the sun, and the heat that it generates, eats up the chlorine in the pool. With the amount of chlorine lessened, dirt and phosphates can morph into algae and turn pool water murky and give it green, yellow, even dark colors. The hotter the air and the stronger the sun, the more likely that this event will happen.

So how can you minimize the effects of the sun and heat on algae blooms? The best way to do this is to pump up the amount of cynaric acid in your water. Cynaric acid serves as a stabilizer that protects disinfectants such as chlorine and allows them to do their work in keeping your pool clean and swim ready. Cynaric acid pretty much keeps everything in tip-top shape, serving the same purpose that sulfites do in wine and allowing chlorine to do to water what pasteurization does to milk.

Like anything else, too much cynaric acid can be harmful and skew the readings when it comes to the water’s calcium content and alkalinity. But if you find the right balance, you’ll keep algae blooms at bay. Monitor your chlorine levels on your IntelliChem or ScreenLogic and when they get low, increase the cynaric acid before adding more chlorine. A little water chemistry can keep the algae at bay and your pool looking beautiful.


Discover Ultimate Pools

Ultimate Pools has been a leader in pool building and outdoor improvements in Magnolia, The Woodlands and Southeast Texas since 1991, specializing as a pool builder since 1999. From pools, waterfalls, hot tubs, decks, outdoor kitchens and outdoor improvements, Ultimate Pools will provide the highest of quality and customer service to you. Surf our website, send us an email, give us a call at (936) 321-9632, or visit our offices at 5170 FM 1488, Magnolia, TX 77354 today!

Cleaning your pool after flooding and heavy rains

spa black

It’s springtime in Southeast Texas, which means rain — lots of it. This past week saw the area deluged by storms, causing flooding and destruction all over the Houston area. Along with the flooding of highways, yards and houses, the recent weather has caused area pools to be filled with rainwater and debris, both floating and wind-blown.

When we redesigned this website a year ago, we did a series on the effects of rain when it comes to building your pool. This rainstorm has prompted us to pen this writeup on how to clean and get your pool back in swim mode after heavy storms and flooding.

Three variables in cleaning your pool after flooding or a storm

pool black

The rain had let up a bit but seems to have come back with a vengeance. It will stop eventually at some point. When it does, it’ll be time to look in your backyard to see how the pool is holding up. While your pool might not look quite like the picture above, odds are that there are a lot of displaced items in it. Whether it’s animals that have decided to take residence in your pool, dirt or leaves that were blown in, or simply an overflow of displaced rain or groundwater, your pool isn’t exactly swimmable right now.

It’s not a simple as taking a skimmer and scooping out the foreign debris, though. Here are the three things you have to be cognizant of while getting your pool back in shape.

Safety

Before starting the process of cleaning your pool, it’s important to take the appropriate safety measures. When it comes to flooding, that means making sure any animals or debris such as broken glass or branches are identified and removed safely and completely.

We know what you’re thinking — what kind of animals could possibly be in my pool? Well, the recent flooding saw a baby tiger get loose in Conroe. While we don’t expect any big cats to make an appearance in your backyard, don’t be surprised if snakes, bugs or small mammals — alive or dead — get blown or washed into your pool from the flooding. Spiders can also make an appearance, especially in dark places such as filters and skimmers. That includes poisonous spiders such as the brown recluse, so wear gloves and be careful when sticking your hands inside the filters or skimmers.

As for other animals, the amount of caution depends on the animal. Many bugs and smaller snakes can be removed with minimal risk, but if you get a larger snake, a poisonous snake such as a copperhead, or a sizable dead mammal, you’ll want to have an animal removal service do the trick.

As far as glass and other debris, the advice is the same as with the spiders — be careful and don’t haphazardly stick your hands into hard-to-see dark areas. Have a flashlight handy and be safe.

Particulates

Once you’ve gotten all potentially hazardous material out of the pool, it’s time to deal with the other annoyances that have blown or washed into the pool. Heavy storms and flooding can introduce all sorts of particulates to the equation, items such as leaves, dirt, mud, sand, and mulch. These elements will overpower your robotic cleaner and clog up your filters, so you have to be careful.

While you’ll be able to grab some of the bigger chunks of debris, others will have to be removed by vacuuming and filtering. To best do this, turn off your pool and let the particulates settle on the surface of your pool before starting the vacuum process. To vacuum your pool, attach the vacuum tube to the filter pump, screw on the vacuum head and turn on the pool, allowing your pump to suck debris from the surface to the filter.

Odds are that you’ll have to do this process a few times, as the filter can only handle so much material before being clogged. Turn off the vacuum, clean the filter, and repeat the above process until the vast majority of the particulates are gone. At that point, your robotic cleaner should work effectively.

In extreme cases of heavy particulates, draining the pool partially is an option. Doing this, then scrubbing the surface, will help prevent algae blooms after a flood. If you decide to drain the pool, do not drain more than half of it and certainly do not drain all of it. If you do the latter, your pool will be dislodged from the ground (which is filled with groundwater that will push the shell of your pool up) and start to float. If this happens, you’ll have to completely rip out your pool and re-do it. And you don’t want that.

Another way to combat algae, or even the staining of your plaster from material such as mulch, is to scrub your pool once a day during the storm. Scrubbing your pool breaks up the material and can save you money down the road, as the chemicals in mulch combined with standard white plaster can cause discoloration and, eventually, the replastering or acid-washing of the surface.

Chemical rebalance

Once you have the debris and particulates removed, it’s time to get your water back in balance. Introducing heavy rain and groundwater will alter the pH and chlorine balance. If you have an IntelliChem then you can set the system to your preferred specs and have the system do its work. We noticed that pools with IntelliChem did a good job of keeping the pool’s water chemistry afloat (pun intended) during the most recent storms.

If you don’t have an IntelliChem, then you’ll need to add chlorine to your pool during the storm to keep the water close to balance. With the excess rain, ground and flood water that’s present, you’ll want to go a little heavier on chlorine than you normally would. Pouring the chlorine while you are brushing the pool is a good way to be efficient with your maintenance time.


Discover Ultimate Pools

Ultimate Pools has been a leader in pool building and outdoor improvements in Magnolia, The Woodlands and Southeast Texas since 1991, specializing as a pool builder since 1999. From pools, waterfalls, hot tubs, decks, outdoor kitchens and outdoor improvements, Ultimate Pools will provide the highest of quality and customer service to you. Surf our website, send us an email, give us a call at (936) 321-9632, or visit our offices at 5170 FM 1488, Magnolia, TX 77354 today!